Knoll Systems LED1081 user manual Pip

•Menu Position: Select Menu Position from the GENERAL menu to change the OSD menu position. The default setting is “” (top left).

•PIP Select: To select a Picture in Picture source, press or to highlight PIP Select, then press ENTER. This displays the PIP Select sub-menu.

The default source selection is Off. All sources that are not available (refer to Source Enable on page 49) are grayed out.

Figure 4-4: PIP Select Sub-Menu

• PIP Position: Press or to select the on-screen PIP position. Choose one of the following:

DMD Area 1920x1080 644x362

PIP

(top right)

921x518 921x518

PBP1PBP2

Screen-Safe Area 1842x1036

Figure 4-5: PIP and PBP areas for 1080p Display

Operation 37