![](/images/new-backgrounds/1171190/17119065x1.webp)
Lens Shift
To access the lens shift controls:
1.Loosen the two screws located at the rear side and underneath of the projec- tor as shown in the figure at the right.
2.Slide the center portion of the top cover backward to expose the holes for lens shift.
Vertical Lens Shift: To shift the projected image vertically, insert the provided hex wrench into the hole at the top of the pro- jector (directly above the lens). Then, turn the wrench as shown to shift the lens in the desired direction.
Horizontal Lens Shift: To shift the project- ed image horizontally, insert the provided hex wrench into the hole at the top of the projector. Then, turn the wrench as shown to shift the lens in the desired direction.
Vertical Lens Shift
Horizontal Lens Shift
Installation 33