2.4 LED1081 Remote Control
Figure 2-5 shows the LED1081 remote control, and the paragraphs that follow describe its functionality.
15 |
| |
14 |
| |
13 |
| |
12 | 8 | |
11 | ||
9 | ||
10 | ||
|
Figure 2-5: LED1081 Remote Control
1.ON: Use this button to turn the projector on.
2.OFF: Use this button to turn the projector off.
3.Source Selection Buttons: Press to select a video source.
HDMI1, HDMI2, RGB, COMP1, COMP2, VIDEO or
4.Cursor Keys ( 
, 
, 
, 
):
Use these buttons to select items or settings, adjust settings or switch display patterns.
ENTER: Press to select a highlighted menu item or confirm a changed setting.
5.Aspect Ratio Selection Button: Press this button re- peatedly to select one of the following aspect ratios:
•16 : 9: For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
•Letterbox: For viewing LaserDisc movies or
•4 : 3: Scales the input signal to fit 4:3 sources in the center of the screen.
•4:3 Narrow: Scales the input signal to fit 4:3 sources in the center of the screen when using an anamorphic lens.
•Native: Displays source image in its native resolu- tion without
6.TEMP: Press this button to adjust the color temperature.
7.OS: Press this button to switch to the next Overscan mode.
8.NR: Press this button to show or hide the Noise Reduction slider.
9.MP: Press this button to select where the OSD men- us display on the screen.
10.SWAP: Press this button to swap the PIP image with active source image.
11.PIP: Press this button to switch to the next PIP image.
12.GAMMA: Press this button to switch to the next Gamma setting.
13.CONT, BRIGHT, SHARP:
Press these buttons to show or hide the Contrast, Brightness, and Sharpness sliders.
14.USER 1, USER 2: Press these buttons to recall pre- set User display settings 1 and 2.
15.MENU: Press this button to show or hide the OSD menu.
Controls and Functions 15
