Kobe Range Hoods CH7948SQB, CH7936SQB, CH7942SQB Duct Cover Installation, Attach Together

Models: CH7930SQB CH7948SQB CH7942SQB CH7936SQB

1 102
Download 102 pages 18.25 Kb
Page 18
Image 18

Duct Cover Installation

4.Mark the position of the duct cover-mounting bracket. Use reference E from Table 2 for references. Attach and secure duct cover-mounting bracket with two screws (not provided). Refer to Figure 27. NOTE: Inner duct cover will cover the mounting bracket.

5.Connect electrical wires. Refer to “Wiring to Power Supply” on Page 17.

6.Slide the inner duct cover up 2 inches before sliding the entire duct cover onto the hood. Refer to Figure 28.

Figure 27

Figure 28

7.Adjust the height of the inner duct cover to the duct cover-mounting bracket. Secure the inner duct cover with two (4x8 mm) screws (provided) as shown in Figure 29.

Attach Together

Figure 29

8.Fasten outer duct cover to multi vent exhaust on the hood with four (4x8 mm) screws (provided).

16

Page 18
Image 18
Kobe Range Hoods CH7948SQB, CH7936SQB, CH7942SQB, CH7930SQB installation instructions Duct Cover Installation, Attach Together