Using Additional Calibration Features
March 2001 3-29
Editing Information on the Aim Tab
The Aim tab specifies:
•whether the aims used for calibration are Density Aims or Li ghtness Aims
•whether to apply the Channel-Independent Matrix
•which table to use if Copyright Detection is functional
The values displayed in the example are the default settings .
To edit the configuration information on the Aim tab:
1. Change the Aim information as needed.
2. If you have completed all editing (including information o n the other tabs),
click OK to save the changes and close the Edit Configuration window. (Or,
click Cancel to cancel all changes.)
3. To continue making changes to the Edit Configuration, click another tab and
make changes as needed.
Attribute Description
Desired Aim Indicates whether to use Density Aims or Lightness Aims for calibration. Using
Lightness Aims will improve both the highlights and shado ws of your prints.
Apply Channel
Independent Matrix? Indicates whether or not to apply the Channel-Indep endent Matrix to the aim
values. If the matrix is applied, the number of cycles requi red to successfully
calibrate the printer should be reduced.
Copyright Detection
Table Select the table to be used. This feature is available with Gen II LED printers
only. Only use this feature as instructed by Kodak.