March 2001 4-1
4 Installing and Using the CentralizedDensitometer Application
IMPORTANT: This chapter p ertains only to users of WINDOWS NT Systems.
The Centralized Densitometer Application topics covered in this section include:
•Installing the application on a WINDOWS NT System
•Modifying printer and port information
•Viewing graphs

Installing the Centralized Densitometer Application

If you have a network of printers and will be using the Centrali zed Densitometer
application, install it on the host computer that will be connec ted to the central
densitometer.
NOTE: The Kodak Pr ofessional Device Calibration application must be in stalled
on each host PC connected to a printer; the Centralized Den sitometer
application needs to be installed only on the computer with th e
densitometer.

System Requirements

•WINDOWS NT 4.0 with service pack 3 or higher
•170 KB available disk space
•At least 2 MB main system memory
•CD ROM Drive