Using Additional Calibration Features
3-26 March 2001
The display shows the LED Calibration Application window.
2. Click the Edit icon or select File->Edit.
The display shows the Edit Configuration window with the Procedur e tab
displayed.
3. To navigate among the tabs, click the tab you want and follow the instructions
for updating the information for that tab.
IMPORTANT:Whenever you click OK, the software assumes ALL changes to
the Edit Configuration are complete and the Edit Configuration
window closes. Similarly, you can click Cancel at any time while
the Edit Configuration window is open; any changes you made
to any of the tabbed information are canceled and the Edit
Configuration window closes.
For Macintosh users only: you can click Default at any time to reset the attrib utes
to their factory defaults and then click OK to save the defaults.