Message: There is already an open Source in use.
Description/Action: If you want to change scanners, exit and restart the Brightness and Contrast Control then select the desired TWAIN Source. You cannot change sources while the Brightness and Contrast Control is running.
Message: Unable to open the Source Manager selection dialog box.
Description/Action: Exit and restart the Brightness and Contrast Control application. If the error occurs again, open the Scan Validation Tool to verify that it is working properly. If it is, call Kodak Service for assistance with the Brightness and Contrast Control. If the Scan Validation Tool is not working properly, contact Kodak Service for assistance with the scanner.
Message: Unable to enumerate first TWAIN Data Sources.
Description/Action: Be sure the Kodak Scan Validation Tool is installed on the PC where you are currently running the Brightness and Contrast Control.
Message: Unspecified TWAIN error.
Description/Action: Exit and restart the Brightness and Contrast Control application. If the error occurs again, open the Scan Validation Tool to verify that it is working properly. If it is, call Kodak Service for assistance with the Brightness and Contrast Control. If the Scan Validation Tool is not working properly, contact Kodak Service for assistance with the scanner.
Message: Source could not return color table information.
Description/Action: Exit and restart the Brightness and Contrast Control application. If the error occurs again, open the Scan Validation Tool to verify that it is working properly. If it is, call Kodak Service for assistance with the Brightness and Contrast Control. If the Scan Validation Tool is not working properly, contact Kodak Service for assistance with the scanner.
Message: Source does not support ICAP_XFERMECH.
Description/Action: The Brightness and Contrast Control can only be used with Kodak scanners. Be sure the TWAIN Source you selected is for a Kodak scanner.
Message: ICAP_XFERMECH not support NATIVE transfers.
Description/Action: The Brightness and Contrast Control can only be used with Kodak scanners. Be sure the TWAIN Source you selected is for a Kodak scanner.
Message: Failed to set ICAP_XFERMECH.
Description/Action: The Brightness and Contrast Control can only be used with Kodak scanners. Be sure the TWAIN Source you selected is for a Kodak scanner.
21 |
