. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-60 Reference— Kodak Driver Software
“Can not load image
thumbnail.”
An unusual condition is
detected when trying to
access an image at its
source.
Try again; if the problem persists,
you may not be able to access this
image.
“Can not locate the SCSI
host adapter. Have a
technician install a
supported adapter, or
troubleshoot an installed
adapter.”
The driver does not find
the SCSI host adapter.
You must have a supported SCSI
host adapter installed to access
files from the camera. (Refer to the
read me for supported SCSI host
adapters.)
If necessary have a technician
install a board, or perform
troubleshooting on an
already installed board.
“Can not open image

‘imageid.’

An unusual condition is
detected when trying to
access an image at its
source.
For example, suppose
that you are working
with the images from an
archive folder. This
message can occur if you
have the driver window
opened, and then you
leave the driver, remove
or delete one of the
images from the current
folder, return to the
driver, and then try to
work with the removed
or deleted image.
Try again; if the problem persists,
you may not be able to access this
image.
“Can not play sound file.” The sound file may be
corrupt.
If possible, record the sound again
and repeat the operation.
Otherwise, you may not be able to
play the sound.
Message Possible Cause Suggested Solution