Kodak DCS 410, DCS 420, DCS 460, NC2000e III. Camera Used with a Macintosh PowerBook or a PC Laptop

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-24 Preparing the Camera and the Computer

III. Camera Used with a Macintosh PowerBookor a PC Laptop

Follow the steps below to match your computer system, either a

Macintosh PowerBook (part A) or a PC Laptop (part B).

You can use the camera with a variety of PowerBook models (except do

not use the camera with the model 100). However, the information in this

section may not apply to all PowerBook models.

For this installation you will need to supply an HDI-30-pin to 25-pin

Macintosh PowerBook SCSI adapter cable. Do not use a terminator.

NOTE: This cable is available in two versions; be certain that your cable is no

longer than three feet long, and that you obtain a cable for connecting a

PowerBook computer to a SCSI device, not for connecting a PowerBook com-

puter to a desktop Macintosh computer.

25-pin Connector

HDI-30-pin Connector

PowerBook SCSI Adapter Cable