. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference— Kodak Driver Software 8-61“Can not recognize the
PCMCIA card in the
camera.
Remove the card,
reinsert it firmly, and
try again.
Confirm that the
battery is charged.
Switch to an archive
folder.
The card may not be
formatted. To format
it, click the Camera
Control icon, then
click the Format
button.”
This message occurs
when the driver opens
and is unable to read the
PCMCIA card in the
camera. A variety of
reasons can cause this
occurrence as described
below.
The card is not inserted
properly in the camera.
Remove and reinsert the PCMCIA
card, then try again.
The battery needs
charging.
Attach the AC adapter and charge
the battery.
The PCMCIA card in the
camera is not DOS
formatted.
Click the Camera Control icon,
then click the Format button to
format the PCMCIA card. This
action permanently erases any files
on the card.
Or, if a second PCMCIA card that
is known to be DOS formatted is
available, replace the current
PCMCIA card with the second
card.
Work with an archive folder
instead of this problem PCMCIA
card.
Message Possible Cause Suggested Solution