. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2 Quick Start
1. Obtain and mount a lens on the camera.
A lens is not supplied with the camera system, but is available from
Kodak (and elsewhere). Refer to the appendix “Optional Equipment &
Spare Parts List,” and to the quick reference card regarding lens
behavior.
2. Obtain one or more supported PCMCIA cards.
PCMCIA cards are not supplied with the camera system, but are
available from Kodak (and elsewhere). The camera accepts cards that
support the PCMCIA “ATA interface and operate in 8-bit mode. Refer
to the read-me file on the supplied driver diskette for supported cards,
and to the appendix “Optional Equipment & Spare Parts List.”
3. PC customers only: obtain and install — if not already present — a
supported SCSI host adapter card.
Supported adapters are listed in Chapter 1; brief installation informa-
tion is in Chapter 4.
4. (Optional) PC customers only: Obtain and install a sound board — if
not already present —required to play sounds recorded with the
camera system.
5. Install the supplied software driver.
A. Macintosh: Load the first diskette for the Macintosh driver. Review
its read-me file. Double-click the installer and follow the instruc-
tions it presents to install the software. Refer to Chapter 4.
B. PC: Load the first diskette for the TWAIN (PC) driver. Review its
read-me file. Run the SETUP program to install the TWAIN driver
supplied by Kodak. Refer to Chapter 4.