. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the Camera and the Computer 4-19
A. Follow these steps if none of the connecteddevices are terminated or if one of the devicesis terminated externally.1. Turn off the computer, and all connected SCSI devices.
IMPORTANT: Later, when you connect and disconnect the computer and the
camera on a regular basis, make sure that all devices are off.
2. Place the camera in a convenient position next to the last device in
the SCSI chain of devices connected to your computer.
3. Connect the AC battery charger/adapter to the camera as described
earlier in this chapter. Although this step is optional, we recommend it
whenever the camera is connected to a computer.
4. When you have completed part A or part B of this step, the last device
in the chain should have a cable (with no terminator) connected to
one of its SCSI connector, and the other connector should be empty.
BACK OF ONE OR MORE
NON-INTERNALLY TERMINATED
SCSI DEVICES
Empty SCSI Connector
BACK OF
COMPUTER
A. If there is an external SCSI terminator on an otherwise empty SCSI
connector on the last device, remove it.