Kodak DP2900 manual Connecting with an S-video cable

Setting up the Projector

Connecting with an S-video cable:

inin

audio	S-video
adapter
	cable

audio cable

3.Plug the audio adapter’s white connector into the left “audio out” connector on your video source. Plug the adapter’s red connector into the right “audio out” connector on the video source.

4.Plug the audio adapter’s white connector into the left “audio out” connector on your video source. Plug the adapter’s red connector into the right “audio out” connector on the video source. Plug the audio adapter’s other end into the audio cable.

5. Plug the audio cable into the “audio in”	connector on the
projector.

The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically adjusts to optimize its performance for the incoming video. The input signal for SECAM video is similar to other video signals and cannot be automatically detected, therefore SECAM must be chosen manually. See “Video Standard” on page 38 for details.

21