Kodak DP2900 manual Do you want to play your computer’s audio on the projector?

Setting up the Projector

inin

audio cable

M1-DA analog computer cable

USB mouse

Note: If you are connecting an older MACINTOSH computer that does not have a 15-pin connector, you must use the MACINTOSH adaptor that came with the projector.

Do you want to control the computer’s mouse from the projector’s remote or keypad?

Note: The USB mouse is supported for use with Windows 98, Windows 2000, and Apple OS 8.5 and higher only. You do not need to restart your computer after connecting a USB mouse to use it (it is hot-pluggable).

1.Plug the end of the M1-DA analog computer cable into the mouse connector on your computer.

Do you want to play your computer’s audio on the projector?

1.Plug either end of the audio cable into the audio connector on your computer.

2.Plug the other end of the audio cable into the connector on the projector.

Now you’re ready to turn on the projector and your computer. Skip to “Starting the Projector” on page 22.

19