Image Source

Problem		Cause and Solution


The S-Video image source	Some inexpensive cables are not
does not appear.	compatible with the projector. Be sure to
	use a high quality cable.

Only the start-up screen	•	Verify that the cables are connected
appears and not the image		correctly.
from the image source.	•	Verify that the proper image source is
		connected and that it is selected on the
		Setup tab of the menus.
	• Make sure that the image source is
		turned on.
	• Turn off everything and power up again
		in the proper order.
	•	Make sure that your laptop's external
		video port is turned on. See the
		computer manual for details.
	• Make sure your computer’s video board
		is installed and configured correctly.
	• Make sure your computer has a
		compatible video board. The projector
		isn’t CGA, EGA or SXGA compatible.
	• If you’re using Windows 98:
		1.Open “My Computer” icon, the
		Control Panel folder and then the
		Display icon.
		2.Click the Settings tab.
		3.Verify that the Desktop area is set to
		1024x768 or less.

No image is displayed	• Make sure that you have removed the
		lens cap.
	• Make sure that the lamp is switched on.

Kodak DP2900 manual Image Source