KODAK ESP 3200 Series
Setting your printer as the default printer
If you have more than one printer, and after installation your
For all computers and operating systems: If you haven’t yet installed the printer software, insert the software CD that came with your printer and follow the
For WINDOWS XP OS-based computers
1.Select Start > Control Panel > Printers and Faxes.
2.
For WINDOWS VISTA OS-based computers
1.Select Start > Control Panel > Hardware and Sound > Printers.
2.
For WINDOWS 7 OS-based computers
1.Select Start > Control Panel > Hardware and Sound > Devices and Printers.
2.
For MACINTOSH Computers
When a new printer is installed, it becomes the default printer. If your
1.From the dock, open System Preferences.
2.In the Hardware section, click Print & Fax.
3.Select your printer from the
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you already have an ESP 7 printer and now you adding an ESP 3250 printer), you must install the software for the newer model.
If you are connecting to another ESP 3250 printer or to an older model:
•On a WINDOWS
a.Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
b.If your
•Select No, my printer is not listed, then click Next.
•From the
•Select USB Cable - connect your cable now.
•Connect the USB cable to the computer and printer.
•Click Next.
When your printer is detected, driver installation begins
www.kodak.com/go/aiosupport | 5 |
