Installing and adjusting the output tray
Lifting the flatbed cover
Start and stop scanning
The output tray receives scanned documents from the automatic document feeder after they are scanned. Before scanning documents, be sure the output tray is properly installed and adjusted.
To install and adjust the output tray:
1.Hold the output tray at about a 30° angle.
2.Insert the three tabs on the output tray into the three slots on the automatic document feeder.
3.Lower the tray to lock it into place.
4.Pull the output tray extension wire out to the desire length.
If you have a large book you want to scan (i.e., telephone book), you can lift the flatbed cover to provide easy access to the flatbed.
Before you start scanning, make sure the scanner is on and ready for operation, which is indicated by the green indicator light being on and constant.
Scanning is controlled by software developed for your application. To start and stop scanning, refer to the documentation provided with your application software.
23 |