Document preparation

•A batch of documents to be fed into the scanner must be arranged so the leading edges of all documents are aligned and centered in the input tray; this allows the feeder to introduce documents into the scanner one at a time.

•Staples and paper clips on documents may damage the scanner and documents. Remove all staples and paper clips before scanning.

•Documents should be in good condition.

Paper Weights: 60 g/m2 to 105 g/m2 (16 to 28 lbs.)

Minimum Document Size: 9.4 x 14 cm (3.7 x 5.5 in.)

Maximum Document Size:

•Automatic Document Feeder — 21.6 x 86 cm (8.5 x 34 in.)

NOTE: Long Paper mode will scan document lengths from 35.56 cm (14 in.) to 86.36 cm (34 in.) when the host PC is configured with adequate memory (see “System requirements” for more information regarding memory requirements). See Chapter 4, Image Processing for more information regarding Long Paper mode.

•Flatbed — 21.6 x 29.7 cm (8.5 x 11.69 in.) Paper Types: Bond, Laser, Inkjet, Offset

NOTE: Chemically coated papers may cause excessive wear/swelling of the rollers.

Paper inks: All inks on the paper must be dry before scanning is

started. This includes: Standard offset printing, Inkjet printer, Thermal transfer, Handwriting inks.

Correction Fluids: Liquid Paper®, Tipp-Ex®, Wite-out®, and other similar correction fluids.

24

A-61527 May 2006