Setting the SCSI terminator The scanner comes with a built-in SCSI terminator. The terminator ON/ OFF switch is located on the scanner between the SCSI cable connectors.

•If the scanner is the only or the last device in a SCSI chain, place the terminator switch in the ON position.

•If the scanner is to be located between the computer and another SCSI device, place the terminator switch in the OFF position. Kodak does not recommend the scanner to be connected between devices in a SCSI chain.

Connecting the power When the drivers have been installed, connect the power supply and

cord to the scanner power cord to the scanner. Make sure that the power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible. Before proceeding, be sure the power to the scanner is off.

1.Select the appropriate AC power cord for your region from the supply of power cords packed with your scanner.

NOTE: The power cord for the United States/Canada and China look very similar. The difference is the United States/ Canadian power cord has holes in the prongs, and the Chinese power cord does not.

United States

and Canada

China

2. Attach the power cord for your power type to the power supply.

A-61527 May 2006

15