Configure highlight the image you want to setup. As you select the image, other options will become available on the Scanner Settings dialog box. The availability of these options is dependent upon the selection you make.
Convert Color to Grayscale this option is only available when configuring color cameras. When selected, the scanner will convert the color image data to grayscale before making it available to the host PC.
Image Processing settings The other options on this dialog box allow you to define image processing values that can be applied to your scanner.
Scan Source the host PC provides information to the scanner defining whether to scan one or both sides of the document. Simplex indicates that only one side (front side) of the document will be scanned. Simplex – Back indicates that only one side (back side) of the document will be scanned. Duplex indicates that both sides of the document will be scanned.
Also select one of the following options:
•ADF: select this option when using the scanner in continuous feed mode.
•Flatbed: select this option when using the flatbed for scanning documents that cannot be scanned when used the automatic document feeder, such as thick or bound documents (books).
•ADF/Flatbed: if you select this option, and no documents are in the ADF, the scanner will automatically use the flatbed.
Dots per inch (dpi) or Resolution indicates the scanning resolution, which largely determines the quality of the scanned image. The greater the resolution, the better the reproduction. However, scanning at a higher resolution also increases scanning time and file size.
Choose a resolution value from the
55 |