Cleaning the imaging | 1. Remove dust and debris from this area by using a Staticide wipe or |
area | a small brush. Be careful not to scratch the glass when cleaning. |
| Use caution when cleaning the upper and lower white |
| background strips. Be careful not to catch the small black tabs |
| with the Staticide wipe. These tabs are fragile and can bend or |
| break. |
| IMPORTANT: Staticide wipes contain isopropanol which can cause |
| eye irritation and dry skin. Wash your hands with soap |
| and water after performing maintenance procedures. |
| Refer to MSDS for more information. |
2.Wipe the imaging area again with an
3.When finished, close the ADF cover.
Cleaning the platen glass To clean the smudges and fingerprints on the platen glass:
1.Open the flatbed cover.
2.Wipe the flatbed platen glass with a fresh Staticide wipe.
3.Wipe the flatbed platen glass with a dry Staticide wipe.
70 |