Scanner Control

Selecting the Scanner Control button on the More Scanner Settings

dialog box

dialog box displays the Scanner Control dialog box.

 

This dialog box allows you to set multi-feed detection and transport

 

control. The settings in this dialog box do not affect the quality of the

 

image.

 

OK saves the values set on the dialog box.

 

Cancel closes the dialog box without saving any changes.

Multi-Feed Detection

Length Detection this option can be enabled or disabled. The

options

default is disabled. If Length Detection is enabled, enter the maximum

 

length. This is the minimum length of the document that can be

 

scanned with a multi-feed being detected. Length detection is used

 

when scanning same-sized documents to check for overlap. For

 

example, if you are scanning 8.5 x 11-inch (A4) documents in portrait

 

mode, you may want to enter a value of 11.25 inches (28.57 cm) in the

 

Maximum Length field.

 

Units — defines the primary measurement system. Pixels, Inches,

 

and Centimeters are available.

 

Auto Set when enabled, will automatically set the maximum length

 

value to .50-inch (1.27 cm) greater than the length of the currently

 

selected page size.

 

Stop scanner on Multi-Feed— when enabled, the scanner will stop

 

when a multi-feed is encountered.

 

Sound Alarm on Multi-Feed— when enabled, the scanner will alert

 

you with the sound you selected when a multi-feed is encountered.

 

Sound — select this option to choose the sound you would like your

 

PC to make to alert you of a multi-fed document.

 

To choose a sound:

 

1. Click on the Sound button to display the Open dialog box.

 

2. Choose the desired .wav file.

 

3. Click Open on the dialog box and the sound will be saved.

A-61527 May 2006

65