Back view
SCSI ports
Power | Power |
| Terminator | SCSI ID | |
switch | port | USB port | |||
switch | selector | ||||
|
|
|
Indicator lights
Power switch — turns the scanner on and off.
Power port — connects the power cord to the scanner. USB port — connects the scanner to the PC.
SCSI ports — two
Terminator switch — allows you to turn SCSI termination on or off if the scanner is at the middle or the end of a SCSI chain.
SCSI ID selector — allows you to assign a specific SCSI device ID to the scanner.
There are three indicator lights on the ADF.
When you first turn on the scanner, all three lights illuminate momentarily and then flash as the scanner goes through a series of
Power (green) — illuminates and stays on for power.
Ready (green)
•flashes when the lamps are warming up
•illuminates when the scanner is ready to scan
•off when the scanner is in Standby mode
Error (red) — illuminates or flashes when there is an error condition.
NOTE: When the scanner is in Energy Star Saving mode, all the indicators will be off.
20 |