Getting started
www.kodak.com/go/support 4
Setting up your picture frame

Buttons and controls

All buttons and controls described in this guide (for
example: press ) are on the remote control
unless otherwise noted.

Connecting the power cable

1Plug in the power cable.
Your power cable (included with the frame) may be
different from the one pictured. Use the plug that
accommodates your type of power outlet.
2Pull out and extend the stand on the frame back
and place the frame on a flat, stable surface.
NOTE: Your frame is set up to display in landscape orientation .
You can turn it to portrait but you must also change the
setting. Press Home , Settings
Viewing
options
Frame orientation. See page17.
back
OK
menu