Kodak Z612 manual AF Zone, Selectable-zone AF- use, AF Control

Doing more with your camera

Setting	Icon	Options
Exposure Metering		Multi-pattern (default)—evaluates lighting
Evaluate light levels at		conditions throughout the image to give an optimum
specific areas of a scene.		picture exposure. Ideal for general picture taking.
Only available in PASM		Center-weighted—evaluates the lighting
modes.		conditions of the subject centered in the viewfinder.
		Ideal for backlit subjects.
		Spot—similar to Center-weight, except the metering
		is concentrated on a smaller area of the subject
		centered in the viewfinder. If used with Selectable AF
		zones, the exposure spot follows the focus zone. Ideal
		when you need an exact exposure of a specific area in
		the picture.
AF Zone		Multi-zone AF (default)—evaluates zones to give
Select a large or concentrated		an even picture focus. Ideal for general picture taking.
area of focus.		Center-zoneAF—evaluates the small area
Only available in PASM		centered in the viewfinder. Ideal when precise focus
modes.		of a specific area in the picture is needed.
		Selectable-zone AF—use	/	to move
		the focus brackets to any focus zones.
		NOTE: For the best pictures, the camera is set to Multi-zone
		when in Landscape mode.
AF Control		Continuous AF (default)—camera continuously
Choose an auto-focus setting.		adjusts to keep the picture in focus. There is no need
This setting remains until you		to press the Shutter button halfway down to focus.
		This option uses the most battery power.
change it.
		Single AF—minimizes camera noise. Camera is only
		in focus when the Shutter button is pressed halfway
		down. This option uses less battery power.

34 www.kodak.com/go/support