Kohler Discovery Mains pressurised instantaneous, hot water system thermal store, Pumped system

Unvented mains pressure system
	Recommended
The shower can be installed with a
unvented, stored hot water cylinder.
Flow	Regulator

Mains pressurised instantaneous
hot water system (thermal store)
		Recommended
The shower can be installed with
systems of this type with balanced
pressures.
Note! Flow regulator recommended to be
	Regulator
installed, refer to the ‘Discovery Fittings
Installation Manual’.
Flow

Pumped system

The shower can be installed with an inlet
pump (twin impeller). The pump must be
installed on the floor next to the hot water
cylinder.
Note! Flow regulator recommended to be
		Recommended
installed, refer to the ‘Discovery Fittings
Installation Manual’.
Flow	Regulator
		90°
		30°-60°
		Air Separation

9