Kohler K-683, K-684, K-686, K-685 manual Preparation

30' (9.14 m) 4-Pin Interface Cable	Auxiliary Interface
	(Outside Shower)

Primary Interface

(Inside Shower)

Drip Loop

Power Supply

Connector

Drip Loop

Outlet

30' (9.14 m) 8-Pin Interface Cable

Drip Loop

Drip Loops

1. Preparation

If not already installed, install the digital valve at this time according to the instructions packed with the product.

NOTE: The optional auxillary interface, with the 4-pin cable, is located outside the showering enclosure, while the primary interface, with the 8-pin cable, is located inside the showering enclosure.

Determine all required components along with their installation locations before beginning this installation.

Custom showering experiences other than the preprogrammed options must be programmed into the interface prior to use. Refer to the ″Digital Interface Homeowners Guide.″

NOTE: The 8-pin cable is used for the primary interface and the 4-pin for the auxillary interface.

Verify that both the primary and auxillary interface are located so the interface cable easily spans the distance between the valve and interface connection.

Kohler Co. 5 1043184-2-B