Kohler K-686 Prepare the Site, Cutout Interface lip 1/4 6 mm, 7-11/16 19.5 cm, Wall, 1043184-2-B

7-11/16"

(19.5 cm)

Cutout

Interface lip

1/4" (6 mm)

3-11/16"

(9.4 cm)

52" (132.1 cm)

Wall

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Shim

Clamp Arm

1/2" (1.3 cm) Min Clamp Arm Clearance

3/16" (5 mm) Min –

2" (5.1 cm) Max Depth

2. Prepare the Site

NOTE: Portrait interface shown, landscape interface also available.

NOTE: Allow for a 1/4″ (6 mm) overlap for the lip of the wall sleeve and a minimum clearance of 1/2″ (1.3 cm) around the back of the opening to enable the clips to fully engage.

Refer to the rough-in information. With a pencil, mark the cut lines onto the finished wall.

Carefully cut out the opening in the finished wall following the penciled guidelines.

For thin finished wall materials of less than 3/16″ (5 mm), shim around the back of the opening to provide adequate support for mounting the interface wall sleeve.

1043184-2-B 6 Kohler Co.