Kohler K-686, K-684, K-683, K-685 manual Important Instructions, Specifications

IMPORTANT INSTRUCTIONS

WARNING: When using electrical products, basic precautions should always be followed, including the following:

DANGER: Risk of electric shock. Connect only to circuits protected by a Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage Circuit Breaker (ELCB). Grounding is required. The unit should be installed and grounded by a qualified service representative.

WARNING: Risk of electric shock. A licensed electrician should route all electrical wiring. WARNING: Risk of electric shock. Disconnect power before servicing.

WARNING: Risk of injury or property damage. Please read all instructions thoroughly before beginning installation.

NOTICE: Follow all plumbing, electrical, and building codes.

Specifications

Pressures

Maximum Static Pressure	125 psi, 862 kPa, 8.6 bar
Supply Pressure Differential*	Max 5 psi, 34.5 kPa, 0.34 bar (Equal pressures recommended.)
Minimum Flow Rate	1.6 gpm (Less than 72 psi dynamic pressure.)
	6 lpm (Less than 500 kPa maintaining pressure.)
	2.1 gpm (Greater than 72 psi dynamic pressure.)
	8 lpm (Greater than 500 kPa maintaining pressure.)
Temperatures
Programmable Temperature	Max 120°F (49°C) Min 79°F (26°C) Full cold may also be selected.
Default Temperature at Start-up	102°F (39°C)
Minimum Mixed Temperature	3.6°F (2°C)
Differential from Hot Supply
Optimum Thermostatic Control Range	86°F (30°C) to 120°F (49°C)
Temperature Stability at Recommended	+/- 1.6°F (1°C)
Supply Conditions
Ambient Temperature	Greater than 34°F (1°C), Max 104°F (40°C)
Maximum Relative Humidity	95% non-condensing
Electrical
Electrical Service	100-240 VAC, 50-60 Hz, 1.5 A
User Interface Cable Length (supplied)	30 ft (9.14 m)

*In commercial applications where there is a large difference in hot and cold supply pressures or frequent fluctuation in either supply line is anticipated, it is strongly recommended that pressure regulators be installed.

1043184-2-B 2 Kohler Co.