Kompernass KH 2391 Setting the volume, Setting the 3-Band PLL Tuner, Seek 1 / 2 , Mute Function

Operation

[MULT OFF]: CD playback from the CD compartment cu.

•Turn the “SEL / VOL” control knob coto set the desired function.

BEEP ON / OFF:

[BEEP ON]: A beep is heard through the loudspeak- ers when the radio is operated.

[BEEP OFF]: No beep is heard when the radio is operated.

•Turn the “SEL / VOL” control knob coto set the desired function.

SEEK 1 / 2 :

[SEEK 1]: The automatic station search stops at the first radio station that can be received.

[SEEK 2]: The automatic station search only stops

after the 9 button 6or the : button 7 is released.

•Turn the “SEL / VOL” control knob coto set the desired function.

STEREO / MONO:

Stereo or mono sound playback during radio reception.

•Press the “SEL / VOL” control knob co. [STEREO] appears in the display window 9.

•Turn the “SEL / VOL” control knob coagain. [MONO] appears in the display window 9.

LOCAL / -DX-:

[LOCAL]: Radio stations in the local vicinity with a strong transmission signal are played back. [-DX-]:Distant radio stations with a weak trans- mission signal are also played back.

•Turn the “SEL / VOL” control knob coto set the desired function.

•Press the “SEL / VOL” control knob co.

Your settings are automatically stored.

After 10 seconds the device automatically changes to playback mode.

16 GB/IE

LSetting the volume

•Increase the volume by turning the “SEL / VOL” control knob coin a clockwise direction.

•Reduce the volume by turning the “SEL / VOL” control knob coin an anticlockwise direction.

Mute Function

The mute function enables you to turn off the loudspeakers.

•Press the MU/DIM button bo. Playback is muted and [MUTE ON] appears in the display window 9.

•Press the MU/DIM button boagain. Playback continues as before the MUTE function was activated and [MUTE ON] disappears from the display window 9.

LSetting the 3-Band PLL Tuner

•Press the • MODE button cnuntil TUNER ap- pears in the display window.

You can select 3 x FM frequency bands (FM1, FM2 and FM3), 1 x medium wave frequency band (MW) and 1 x long wave frequency band (LW). Each fre- quency band has six presets on which you can store radio stations.

•Press the • BAND button bland select the fre- quency band you wish to receive. In the display window 9you will now see the desig- nation of the frequency band (e.g. [FM2]), the frequency (e.g. [99.20]) of a radio station that is being received or the programme ID during stereo reception and [TP] for traffic information.

Automatic Station Search
	In the case of preset playback function SEEK1:
•	Press the			button 6or				button 7
			9			:
	for two seconds. The tuner automatically stops
	at the first radio station that it receives and
	shows the information in the display window 9.
	In the case of preset playback function SEEK2:
•	Press and hold down the						button 6or
					9
		button 7in order to approach the
	:
	desired frequency. After the button has been

KH2391_Content_UK.indd 16

05.09.2006 14:49:14 Uhr