Kompernass KH 6507 manual Configuring the Digital Output, Configuring Prologic

OFF

Disable the DOWNMIX and enable the 5.1ch function.

9.6.2. Configuring the Digital Output

1Select the main menu item Audio Setup Page, then the submenu item SPDIF Setup.

2In the Digital Output Setup Page, select the sub- menu item SPDIF Output.

3Choose between the options …

SPDIF Off

Select SPDIF Off if you have not connected any digital audio components to the DVD player.

SPDIF/RAW

Select SPDIF/RAW if you have connected a multi- channel digital audio component – such as a Dolby Digital or DTS receiver or a 5.1 channel surround sound system – to the DVD player via an optical or coaxial cable.

SPDIF/PCM

Select "SPDIF/PCM" if you have connected a two- channel digital audio component to the DVD player via an optical or coaxial cable.

Manual

Select Manual if you would like to configure the above settings separately for CDs, Dolby Digital, DTS and MPEG and not have them apply generally. After you have selected Manual: In the Digital Output Setup Page, select the submenu items CD, Dolby Digital, DTS and MPEG in turn. For each item, select one of the options SPDIF Off, SPDIF/RAW, SPDIF/PCM only. Then select the submenu item LPCM output. Choose between the sampling frequencies 48 kHz and 96 kHz.

9.6.3. Configuring Prologic

1Select the main menu item Audio Setup Page, then the submenu item SURROUND.

2In the 3D Processing Page, select the submenu item ProLogic II.

3Choose between the options …

On

At the condition of DOWNMIX is setup to OFF, could setup the PRO LOGIC II.When you select ON, it means that 2ch audio could be dummy as 5.1ch, multispeaker could be hard such as VCDs, S-VCDs, MP3.

OFF

Select Off, it means that PROLOGIC II does not work.

ÔOn this topic, also refer to Section 9.6.9.1. "Confi- guring the Speaker Sizes“.

9.6.4.Configuring the Dynamic (Dolby Digital)

To balance out the volume differences between loud and soft passages during playback of Dolby Digital sound:

1Select the main menu item Audio Setup Page, then the submenu item Dolby Digital Setup.

2In the Dolby Digital Setup menu, select the subme- nu item Dynamic.

3Use the control buttons to set a value between Off and Full.

9.6.5. Settings for Mono VCDs/S-VCDs

ôNote:

These settings are only relevant for playing VCDs/S- VCDs. The sound on VCDs/S-VCDs may be available as

Ú1-language in stereo or

Ú2-language in mono

1In the Audio Setup Page, select the submenu item Dolby Digital Setup.

2In the submenu Dolby Digital Setup, select the submenu item Dual Mono.

3For mono VCDs/S-VCDs, select one of the options

…

17