1Press the Mark button once during playback. The bookmark menu is displayed on the screen

BOOKMARK

Fig. 21 Display of the bookmark function

2As soon as the playback has reached the point at which you would like to set the bookmark: Press the Play button once. The following is displayed:

For Audio CDs/VCDs/S-VCDs:

ÚThe number of the track that contains the selected passage.

ÚThe time position of the bookmark in minutes and seconds.

For DVDs:

ÚThe number of the title that contains the selected passage.

ÚThe number of the chapter that contains the se- lected passage.

ÚThe time position of the bookmark in hours, min- utes and seconds.

3If you would like to set additional bookmarks: Use the up/down/left/right control buttons to select additional memory positions for bookmarks. Press the Play but- ton again when you would like to set the bookmark.

4Repeat steps 2 and 3 until you have set all the de- sired bookmarks. To delete bookmarks: Select the number of the bookmark with the up/down/left/right control buttons. Then press the CLR button. The bookmark is now deleted.

Once you have set all the desired bookmarks, press the "Mark" button once to hide the bookmark menu on the screen.

5If you would like to skip to the passages at which you have set bookmarks at a later time: Press the Mark button again. The bookmark menu is display- ed on the screen.

6Select the desired bookmark with the control buttons. Then press the Play button. Playback starts immediately at the location at which you set the selected bookmark.

11.4.5. Using the Program Function

With the program function, you can combine …

ÚAudio CDs/VCDs/S-VCDs tracks

ÚDVDs chapters

into an individual title/chapter/file sequence. You can speci- fy the order in which the titles/chapters/files should be play- ed. You can combine a maximum of twenty titles/chapters/files for programmed playback.

ÔWhat are titles and chapters? On this topic, please refer to Section19. "Glossary / Key Word Index".

To combine titles/chapters/files for programmed play- back:

1For audio CDs/VCDs/S-VCDs: During playback or while playback has been stopped, press the Pro- gram button once. The program menu is displayed on the screen:

Fig. 22 Display of the program menu for audio CDs

Each of the numbered fields stands for one of the available program memory positions for titles. You must enter the desired title numbers after these numbers.

1For DVDs: During playback or while playback has been stopped, press the Program button once. The program menu is displayed on the screen:

Fig. 23 Display of the program menu for DVDs

27

Page 27
Image 27
Kompernass KH 6507 manual Using the Program Function, For Audio CDs/VCDs/S-VCDs, For DVDs