Before making copies 3
bizhub 162/210 3-35
Copying onto manually fed paper by manual bypass
1Position the documents.
For details refer to “Loading the document” on page 4-10.
2Adjust the paper guides to fit the size
of the paper.
3Insert one sheet of paper with the
front side facing down, lightly sliding
the paper as much as possible into
the feed slot.
The manual bypass mark ( ) ap-
pears in the bottom line of the
screen.
?Is a card or a postcard loaded?
%Make sure that it is not curled (rolled).
4Press the [No/C] key.
The paper source setup menu appears.
5Press the [*] and [)] keys to select
the type of paper loaded.
Select from the following four paper
type settings.
PLAIN
OHP
CARD
ENVELOPE
6Press the [Yes] key.
The paper size menu appears.