Konica Minolta 920 manual User Authentication in Enhanced Secu- rity Mode

4

User Authentication in Enhanced Security Mode

4User Authentication in Enhanced Secu- rity Mode

4.1Description of user authentication

In Enhanced Security mode, setting up password conditions will be tougher to improve security. The administrator should set up a user name and pass- word required for user authentication, as this is an administrator operation.

User Name: 1 to 64 alphanumerical characters

Password: 8 to 64 alphanumerical characters (case sensitive)

If a wrong password is entered, attempts to re-try cannot be made for five seconds.

Reminder

Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.

If a password set in normal mode is fewer than 8 characters or more than 64 characters, you cannot use it in Enhanced Security mode.

If this happens, contact the administrator to turn OFF Enhanced Security mode, and set a new password following the above conditions.

Even after a successful access has been made, authentication with user name and password will be required under the following conditions.

-The main power switch is turned off.

-The sub power switch is turned off.

-The [Access] on the control panel is pressed.

-The [Copy]/[Scan]/[Box] on the control panel is pressed, when the User/ Account Authentication Connect is turned on.

-The [Job List] on the touch panel is touched, when the User/Account Au- thentication Connect is turned on.

-The auto reset function operates.

8 bizhub PRO 920