The battery should be fully charged before cleaning the

 

 

 

 

 

 

 

 

 

CCD. If battery power is low, this function cannot be used.

 

 

 

 

 

 

 

 

 

 

LCD backlight

 

 

 

 

 

 

The use of the optional AC adapter is recommended over

 

Power save

 

 

 

 

 

 

the use of the battery. Cleaning the CCD without sufficient

 

MenuSec.Memory

 

 

 

 

 

 

power will cause permanent damage.

 

Delete conf.

 

 

 

 

 

 

Highlight “Enter” and press the center of the controller to

 

Clean CCD

Enter

 

 

Reset default

 

 

 

 

 

 

begin the cleaning routine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LCD backlight

 

 

 

 

 

 

Before the CCD is exposed, a confirmation screen appears;

 

After cleaning CCD,

choosing “Yes” executes opens the shutter and mirror, “No”

 

turn camera off. Continue?

cancels the cleaning operation.

 

Yes

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset default

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remove the lens or body cap.

Use a blower brush to clean the CCD. Hold the body so it is leaning forward to prevent the dust blown from the CCD resettling in the camera. Do not touch the interior of the camera. If the camera starts beeping, power is low. Immediately stop cleaning and turn the camera off.

Turn the camera off to complete the operation. Replace the lens or body cap.

107