DRIVE MODES

The drive modes control the rate and method of image capture. Single-frame advance is the default drive mode and is described in the basic recording section on page 28. The drive mode is set with the drive-mode selection

screen. Press the drive-mode button (1)

to open the screen. Drive-mode indicator

Single-frame and Continuous advance - to take single or multiple images at one time (p. 51).

Self-timer - to delay the release of the shutter by 10 or 2 seconds (p. 51).

Exposure bracketing - to take a series of 3 images with differing exposure (p. 52).

White-balance bracketing - to make 3 images with differing white balance (p. 53) from a single exposure.

Drive modes

Single-frame adv.

:func. :select :enter

Options

Use the up/down keys of the controller to select the drive-mode group.

Use the left/right keys of the controller to highlight the drive-mode option.

Press the center button of the controller to select the drive mode. An indicator is displayed on the monitor to confirm the selection.

50ADVANCED RECORDING