WIRELESS / REMOTE FLASH

Wireless/

Remote

flash

On-camera

Wireless/Remote flash allows the camera to control

flash

an off-camera Program/Maxxum 5600HS(D) and

 

3600HS(D) flash unit without the need of a cable.

 

Single or multiple flash units can be placed around

 

the subject to create different lighting effects.

 

The camera’s built-in flash fires to control the off-

 

camera flash units rather than to illuminate the

 

subject.

 

Flash mode

Fill-flash

Flash control

Red eye

Bracket order

Rear sync.

 

Reset

Wireless

1.Remove the accessory shoe cap (p. 112) and slide a Program/Maxxum 5600HS(D) or 3600HS(D) flash on the accessory shoe until the safety lock engages.

2.Turn on the camera and flash unit.

3.Set the camera to the wireless flash mode in section 2 of the recording menu (p. 70). This simultaneously set a the flash to the wireless mode and sets the camera to the flash’s wireless channel.

4.Press and hold the mounting-foot-release button on the flash unit to disengage the safety catch and remove the flash unit from the camera.

76RECORDING MENU