INSERTING AND CHANGING A MEMORY CARD

Always turn off the camera and confirm the access lamp is not lit before inserting or removing a memory card, otherwise the card may be damaged, and data lost.

A memory card must be inserted for the camera to operate. If a card has not been inserted, “----” is displayed in the frame counter. Type I and II CompactFlash cards and Microdrives are compatible with this camera.

1 2 3

4 5 6

1.Slide the card-slot door toward the back of the camera to release the safety catch and open.

2.Insert a memory card all the way into the card slot. Insert the card so the face is toward the front of the camera. Always push the card in straight. Never force the card. If the card does not fit, check that it is oriented correctly.

3.Close the card-slot door and slide it toward the front of the camera to engage the safety catch.

4.To eject a card, open the card-slot door, and press and release the card-eject lever to extend it.

5.Press the extended card-eject lever to eject the card. The card can now be pulled out. Take care when removing the card as it becomes hot with use. The card-eject lever should remain inside the camera body. If it extends, push it into the camera.

6.Insert a new memory card and close the card- slot door.

24GETTING UP AND RUNNING