PRESET WHITE BALANCE

With the white balance dial in the preset white

balance position, press the white-balance button to open the setting screen.

Preset white balance

Daylight

:select :adjust :enter

Use the left/right controller keys or control dial to select the white-balance setting.

The up/down controller keys shift the white- balance, see below.

Press the central controller button to complete the operation.

The up/down controller keys adjust the white balance in seven levels: +3 to –3 (+4 to –2 for fluorescent). Except for fluorescent, the change of one unit is approximately equal to a 10 mired shift.

Daylight - for outdoor sunlit subjects.

Shade - for subjects illuminated by skylight: shady conditions on a clear day.

Cloudy - for cloudy or overcast outdoor conditions.

Tungsten - for incandescent lighting: household filament light bulbs.

Fluorescent - for fluorescent lighting: office ceiling lights.

Flash - for electronic flash.

For more information on light sources, see page 69.

65