Parameters
Rotor Up Transit (Rotor Up Transition) | [0...99] |
Adjust the time over which the rotor rotation changes | |
from slow to fast. |
|
Rotor Down Transit (Rotor Down Transition) | [0...99] |
Adjust the time over which the rotor rotation changes from fast to fast.
Speed |
| Slow |
Fast |
| |
|
| |
|
| Fast Speed |
| Slow Speed |
|
|
| Time |
| Up Transit | Down Transit |
Rotor Stop Transit (Rotor Stop Transition) | [0...99] |
Adjust the time over which the rotor rotation actually | |
comes to a stop after you stop the rotation. |
|
Rotor Strt Transit (Rotor Start Transition) | [0...99] |
Adjust the time over which the rotor reaches the specified speed after it begins to rotate.
When Rotary is on |
| |
Speed |
| Stop |
Start |
| |
|
| |
|
| Slow or Fast Speed |
|
| Time |
| Start Transit | Stop Transit |
Horn Mic Distance | [0...99] |
Adjust the distance between the horn and the mic.
Horn Mic Spread | [0...99] |
Adjust the feeling of spaciousness for the sound of the horn.
Rotor Mic Distance | [0...99] |
Adjust the distance between the rotor and the mic.
Rotor Mic Spread | [0...99] |
Adjust the feeling of spaciousness for the sound of the rotor.
Mic Spread
Mic Distance | Horn | Mic Distance |
Rotor
Group 7
Split Point (Keyboard Split Point) | [C2...C7] |
This parameter is displayed in Normal Edit mode. Specify the split point at which the keyboard will be split. This setting will be the highest key of the left- hand keyboard range.
Split Upper Octave (Upper Octave Shift) |
This parameter is displayed in Normal Edit mode. When the keyboard is split, this parameter lowers the pitch of the
Split Lower Octave (Lower Octave Shift) | [0, +1, +2] |
This parameter is displayed in Normal Edit mode. When the keyboard is split, this parameter uppers the pitch of the
Hold Uppr Ctrl (Controller for Hold Upper)
[Off, Pedal 1/(Pdl1)*, Pedal 2/(Pdl 2)*] This parameter is displayed in Normal Edit mode.
Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn Hold on/off for the notes played on the keyboard for the Upper tone generator.
Pedal 2: A pedal switch etc. connected to the ASSIGN- ABLE PEDAL/SW 2 jack can be used to perform the above operation.
Off: No function.
Hold Lowr Ctrl (Controller for Hold Lower)
[Off, Pedal 1/(Pdl1)*, Pedal 2/(Pdl 2)*]
This parameter is displayed in Normal Edit mode.
Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn Hold on/off for the notes played on the keyboard for the Lower tone generator.
Pedal 2: A pedal switch etc. connected to the ASSIGN- ABLE PEDAL/SW 2 jack can be used to perform the above operation.
Off: No function.
Hold Ctrl (Controller for Hold)
[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*] This parameter is displayed in EX Edit mode.
Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn Hold on/off for the notes you play.
Pedal 2: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.
Off: No function.
Split Sw Ctrl (Controller for Split Switch)
[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*]
This parameter is displayed in Normal Edit mode.
Pedal 1: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack can be used to turn the [SPLIT] key on/off.
Pedal 2: A pedal switch etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack can be used to perform the above function.
Off: No function.
*(Pdl 1), (Pdl 2): These indicate that Pedal 1 or Pedal 2 are selected for the Global mode Group 1 “Prog Up Ctrl” or “Prog Down Ctrl” parameters. With these settings, the settings of Global mode are used, and the settings you made here will be ignored. However if you select another value in Global mode, the display here will change from (Pdl 1) to Pedal 1 or from (Pdl 2) to
20 Pedal 2, and you will be able to operate the corresponding function from the pedal switch.
