Korg CX-3 Dump Program Dump One Program, Dump Program All Dump All Programs, Drawbar Scan

Parameters

Dump Program (Dump One Program)

This command dumps the data for the single program you specify. For details refer to “MIDI data dump” (p.28).

Dump Program All (Dump All Programs)

This command dumps the data for all programs. For details refer to “MIDI data dump” (p.28).

Dump Global (Dump Global Parameter)

This command dumps global data. For details refer to “MIDI data dump” (p.28).

Dump All Prog + Global (Dump All Program and Global Parameter)

This command dumps all program data and global data. For details refer to “MIDI data dump” (p.28).

Drawbar Scan

When the CX-3 receives MIDI control changes, the drawbar registers will be modified, which will mean that the sound will no longer match the Drawbar 1 or 2 settings of the front panel.

When you execute this command, the levels of Drawbar 1 and 2 will be scanned, and their values will be loaded into the drawbar register.

Execute this command when you want the sound to reflect the Drawbar 1 or 2 settings.

Default DB Select (Drfault Drawbar Select)

This registers the current setting of the DRAWBAR SELECT section as the default for when the power is turned on.

Exp Pd 1 Calibration (Expression Pedal 1 Calibration)

If the expression pedal connected to the rear panel EXPRESSION PEDAL jack does not produce the correct amount of control when it is operated, use the following procedure to adjust the sensitivity of the expression pedal.

1 . ConnectanexpressionpedaltotheEXPRESSION

PEDALjack.

2 . Slcommandshitect .

3 . Pressthe[WRITE/ENTER]key.

The display will indicate Set Minimum.

4 . Movmhsetnixpreson,pedalumnitpositi andpressthe[WRITE/ENTER]key.

The display will indicate Set Max.

5 . Movhemaximumtsxpretosipedalnton,positi andpressthe[WRITE/ENTER]key.

Wheel Brake

This simulates the rotation of the wheel that occurs when the power of a combo organ is turned on/off. When you press the [WRITE/ENTER] key, the wheel rotation will gradually slow down and stop. Press the [WRITE/ENTER] key once again, and the wheel will gradually resume rotating.

Group 8

DEMO Play	[1...9]
Here you can select and play the demo songs.
For details refer to “5. Listening to the demo songs”
(p.13).
Type 1 Ex Drawbar 1	[G4...C7]

Specify the sound that will be assigned to the left- most bar (16') of the EX Drawbars (Drawbar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 1 Ex Drawbar 2 [G4...C7]

Specify the sound that will be assigned to the second bar from the left (5-1/3') of the EX Drawbars (Draw- bar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 1 Ex Drawbar 3 [G4...C7]

Specify the sound that will be assigned to the third bar from the left (8') of the EX Drawbars (Drawbar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 1 Ex Drawbar 4 [G4...C7]

Specify the sound that will be assigned to the right- most bar (4') of the EX Drawbars (Drawbar 2) used in an EX program.

This setting will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 1.

Type 2 Ex Drawbar 1	[G4...C7]
Type 2 Ex Drawbar 2	[G4...C7]
Type 2 Ex Drawbar 3	[G4...C7]
Type 2 Ex Drawbar 4	[G4...C7]

Specify the sounds that will be assigned to the EX Drawbars (Drawbar 2) used in an EX program.

These settings will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 2.

Type 3 Ex Drawbar 1	[G4...C7]
Type 3 Ex Drawbar 2	[G4...C7]
Type 3 Ex Drawbar 3	[G4...C7]
Type 3 Ex Drawbar 4	[G4...C7]
Specify the sounds that will be assigned to the EX
Drawbars (Drawbar 2) used in an EX program.
These settings will be used if the EX Edit mode Group
2 “EX Drawbar Type” parameter is set to 3.
Type 4 Ex Drawbar 1	[G4...C7]
Type 4 Ex Drawbar 2	[G4...C7]
Type 4 Ex Drawbar 3	[G4...C7]
Type 4 Ex Drawbar 4	[G4...C7]

Specify the sounds that will be assigned to the EX Drawbars (Drawbar 2) used in an EX program.

These settings will be used if the EX Edit mode Group 2 “EX Drawbar Type” parameter is set to 4.

Since notes above F#8 on the CX-3 are “wrapped around” so that they will sound an octave lower, we recommend that you play keys in the bottom octave of the CX-3 when checking these notes.

26