Korg D16 Off, Off, Off, Off, Scene

1. SceneRead ................................................	[On, Off]
This turns scene playback on/off.

On: Scenes will be played back. The mixer settings will change automatically when playback reaches the time location at which a scene was reg- istered.

When “On,” the [SCENE] key will light.

Off: Scenes will not be played back. In this case, scenes can be freely recalled as general-purpose settings whenever you wish. (→ D16 p.66 “Recall- ing a scene”)

2. Filter .......................................................................

You can use ﬁlters to disable speciﬁc mixer settings (parameters) when registering or playing back a scene. Here you can specify which mixer settings (parameters) will be disabled.

On: The ﬁlter will be turned on for the corresponding channel/parameter, and the scene settings will be dis- abled.

Off: The ﬁlter will be off, and the scene settings will be enabled.

When registering, the ﬁlter acts as a registration ﬁlter for the song.

When playing back, the ﬁlter acts as a playback ﬁlter for the song.

For example, suppose that you turned the “Pan” ﬁlter on for channels 1 and 2, and registered a scene “002” in the middle of the song. We will also suppose that you turned on the “EQ” ﬁlter during playback.

When you set “SceneRead” to “On” and play back from the beginning of the song, the pan settings will not be recalled when you reach scene “002” because the “Pan” ﬁlter is on. In other words, the same pan values as in scene “001” (located at the beginning of the song) will continue in effect, but the remaining parameters will change to the values of scene “002.” “EQ” settings are being played back through the playback ﬁlter, so the values registered in the scene at the beginning of the song will not be used; the current EQ values will be maintained.

3. SceneNumber.........................................

[001...100]

Recalls the mixer settings of the selected scene at the current time.

This is also used to select a scene when you wish to change its name or modify the time at which it is regis- tered.

The time at which the scene is registered is displayed beside “SceneNumber.”

If “SceneRead” (P1-1) is “Off,” you may select any scene you wish. If it is “On,” the scene for the current time location will be selected, and cannot be changed.

4. Sort ........................................................................

This sorts the scenes in order of time.

Normally, scenes are arranged in the order in which they were registered, but you may sort them in ascending order of registered time.

5. Rename ..................................................................

Here you can modify the scene name.

Use “SceneNumber” to recall the scene whose name you wish to change, press the “Rename” button, and modify the name in the dialog box. A name of up to 16 characters can be input. (→ p.3 D16 p.14)

In addition to being shown in the “ReadDel” tab page, the scene name will also be shown in the [SONG] “Sel- Song” tab page if “Select DispParameter” (in that page) is set to “Scene.” (→ D16 p.59)

6. EditLoc....................................................................

Modiﬁes the registered time of a scene.

Use “SceneNumber” to access the scene whose time you wish to modify.

Press the “EditLoc” button to access the dialog box, and modify the time at which the scene is registered.

Press the time value that you wish to change, and use the [VALUE] dial to change the time. Press the “OK” button to conﬁrm your settings, or press the “Cancel” button to cancel the settings you made.

7. Delete.....................................................................

This deletes a scene.

When you delete a scene, the Undo operation is not available.

		7a

7a. SelectAll	..............................................	[On, Off]
	On: All scenes will be subject to dele-
tion. The scene number will be shown as “***”.
	Off: The single scene selected for
“SceneNumber” will be subject to deletion.

8. EdtFiltr....................................................................

Views or modiﬁes the settings of the ﬁlter registered for the scene.

When a scene is stored, it saves all the parameters that can be registered, as well as the state of the ﬁlter.

If the ﬁlter is defeated, you can enable scene data to be