Part select section

1

2

3

4

5

6

1.

(DRUM PART) 1...5, 6A-6B, 7A-7B (drum part keys)

5.

SLICE (slice part key)

 

These keys select drum parts. By pressing these

 

This key selects the slice part. By pressing this key

 

keys you can hear the sound that is assigned to

 

you can hear the sample that is assigned to the

 

each part.

 

slice part.

2.

ACCENT (accent part key)

6.

AUDIO IN PART (audio in part key)
This key selects the accent part.3.(KEYBOARD PART) 1, 2 (keyboard part keys)These keys select keyboard parts.

This key selects the audio in part. By pressing this key you can hear the external audio input.

4. (STRETCH PART) 1, 2 (stretch part keys)

These keys select stretch parts. By pressing these keys you can hear the sample that is assigned to each stretch part.

Step key section

1

2

3

4

5

6

1. SHIFT key

This key is used in conjunction with other keys. Hold down this key and press another key to access the secondary function of that key.

SHIFT+RESET key: Erase data from a pattern.SHIFT+step key: Execute the function printed below the step key.

SHIFT+dial: Make larger or finer changes in the value. (This will depend on the selected part.)

SHIFT+PATTERN key: Compare patterns.

For details on using the shift key with other keys, refer to the explanation of each parameter.

2. PATTERN SET key

By holding down this key and pressing the STEP key, you can switch to the pattern that was registered for that step key (☞ p.72: Pattern Set).

3. KEYBOARD key

When this key is on (lit), you can use the sixteen step keys as a keyboard to play a keyboard part (☞ p.39: Keyboard function). This key will alternate on/off each time it is pressed.

4. [][] (select keys)

These keys are used to control the current position in the lower row (red) of select LEDs. These LEDs indicate different information - pattern set group, keyboard octave, step key position - in conjunction with other keys. (☞ p.13: Select LEDs)

In Song mode, you can use these keys as fast-forward / rewind keys.

12