5. Pattern mode

4.The selected part key will blink. Press the part or motion sequence keys whose data you want to move at the same time, so that these keys are blinking. You can hear the sound of a part each time you press its part key.

5.Press the blinking step key 2 to execute the Random Data operation. (Key 2 will go dark.)

To cancel without executing, press the STOP/CANCEL key.

Copying a partCOPY PART .............................................................................

Here’s how you can copy the selected part (with its sound settings and sequence data, including motion sequence) to another part.

1.If the ESX-1 is playing, press the STOP/CANCEL key to stop play- back.

2.Press a part key to select a destination (copy-destination) for the part being copied (the key will light).

3.Hold down the SHIFT key and press step key 3 (Copy Part). (Key 4 will blink.) The copy-destination part key will begin blinking.

4.Use the dial to select the pattern number of the part to be copied (copy-source).

5.Press a part key to select the copy-source part. (The copy-source key will blink, and the copy-destination key will go dark.) You can hear the sound of the copy-source by pressing its part key. (Keyboard parts will sound at C4.)

6.Press step key 3 once again to execute the Copy Part operation. If you decide to cancel, press the STOP/CANCEL key.

When you copy between parts, only the trigger data is copied.

If the copy operation would result in there being more than 24 motion sequences, the motion sequences will not be copied.

Copying only the sound of a partCOPY SOUND ........................................................................

Here’s how you can copy only the sound settings of another part to the selected part. Step data and motion sequence data will not be copied.

1.If the ESX-1 is playing, press the STOP/CANCEL key to stop play- back.

2.Press a part key to select a destination (copy-destination) for the part being copied (the key will light).

3.Hold down the SHIFT key and press step key 4 (COPY SOUND). (Key 4 will blink.) The copy-destination part key will begin blink- ing.

4.Use the dial to select the pattern number of the part to be copied (copy-source). You can press the SHIFT key to view the pattern name of the copy-destination.

5.Press a part key to select the copy-source part. (The copy-source key will blink, and the copy-destination key will go dark.) You can hear the sound of the copy-source by pressing its part key. (Keyboard parts will sound at C4.)

6.Press step key 4 once again to execute the Copy Sound operation. If you decide to cancel, press the STOP/CANCEL key.

You cannot copy sound data between a keyboard part and a drum

part.

3

3

3

3

65