Error messages

If an error message is displayed, you can clear it by pressing the STOP/CANCEL key.

CardBrk

The SmartMedia is damaged.

➝Make a backup of the files that are on the SmartMedia card. On the ESX-1, Write/Delete op- erations for files on the damaged SmartMedia will be disabled. If the same error occurs even after you execute Format on the card, please replace the SmartMedia.

Card Fmt

The SmartMedia™ could not be read.

➝Use your computer or other device to back up the data on the SmartMedia™ card. Then format the SmartMedia™ on the ESX-1, rewrite the desired files to it, and access it once again from the ESX-1.

CardFull

There is insufficient free space in the ESX-1 or on SmartMedia™.

➝If you want to save data, you must delete unneeded files from the SmartMedia™ card to create suffi- cient free space. Then write or save the data. The SmartMedia™ must have a minimum of approxi- mately 2 MB of free space in order to save ESX-1 data.

FileSave

An error occurred while saving to SmartMedia™.

➝Try the operation once again.

Mem Full

Memory was not sufficient when you attempted to load a sample from SmartMedia or copy a sample inside the ESX-1.

➝Delete unneeded files to increase the amount of free space.

MotSqFul

The motion sequence cannot be recorded.

➝On the ESX-1, you can record a maximum of 24 motion sequences for each pattern.

Use CLEAR MOTION (☞ p.69) to delete unneeded motion sequences, and then input your data once again.

NoFiles

The SmartMedia™ does not contain any files that the ESX- 1 can recognize.

➝The ESX-1 can load only .EMX files.

Protect

You attempted to write the data into memory when the data protect setting was turned on.

➝In Global mode, turn memory protect off.

If the write protect label is affixed to the SmartMedia™, remove it.

EventOvr

You have exceeded the maximum number of events that can be recorded in a song.

➝Delete unneeded song event data.

FileDelt

An error occurred while deleting a file from SmartMedia.

➝Try the operation once again.

FileLoad

An error occurred while loading a file from SmartMedia™.

➝Try the operation once again.

FileName

When saving to SmartMedia, an identically-named folder already exists.

➝Either use your computer to delete the folder from the SmartMedia, or change the filename on the ESX- 1 and save it again.

SongEvnt

While writing a song to a different-numbered song, you exceeded the maximum number of events that can be re- corded.

➝Delete unneeded event data to free up more memory space.

Write

The data could not be written.

➝Try the writing operation once again.

98