Erasing data from a songCLEAR SONG .........................................................................

1. If the ESX-1 is playing, press the STOP/CANCEL key to stop playback.

2. Hold down the shift key and press step key 10 (CLEAR SONG). (Key 11 will blink.)

3.Press step key 10 once again to erase the data from the song. If you

decide to cancel, press the STOP/CANCEL key.

If you erase song data by accident

Turn the dial to re-select that song without saving it, and you will revert to the data that was previously saved.

Changing the pattern in a specific position

1.If the ESX-1 is playing, press the STOP/CANCEL key to stop playback.

2. Use the []/[ ] cursor keys to select “Position” in the display.

3.Use the dial to select the position whose pattern you want to change.

4. Press the [ ] cursor key until the display reads “Pattern.”

5.Use the dial to select the pattern that you want to assign to that posi- tion. If you want to listen to the selected pattern to hear whether it is the one you want, press the Pattern mode key to enter Pattern mode, and play it. To return to Song mode, press the STOP/CANCEL key to stop playback and then press the Song mode key.

Maintaining the part mute settings even when the pattern changes

This function applies the current part mute settings to the entire song.

MUTE HOLD ................................................................

Off, On (p.81 “Event recording”)

1. Press the [

] cursor key until the parameter display reads “MuteHold.”

2.Turn the dial to make the desired setting.

Off:

The part mute settings specified within each pattern will be

 

applied as the position within the song changes during play-

 

back. However if you change the position but the pattern is

 

still the same, the part mute settings will be maintained.

On:

The part mute status will not change even if the position

 

moves to a different pattern. However at the beginning of

 

the song the part mute status will be as specified by the pat-

 

tern selected for position 1.

Playing back songs in succession

NEXT SONG ..................................................

Off, S.01...S.64

 

When one song finishes playing, this function immediately contin-

 

ues playback with the next specified song.

1.

Press the [

] cursor key until the parameter display reads “NextSong.”

2.Turn the dial to select which song will play back following the cur- rent song. If you select Off, playback will stop when the current song

finishes playing.

Ifyouperformeventrecordingetc.whileasongisplaying,thespeci-

fiedNEXTSONGsettingwillbeignored.

TheNEXTSONGsettingisignoredwhenplayingbackinsynchroni-

zationwithMIDIClockmessagessentfromanexternaldevice.The

ESX-1willobeySongSelectmessages[F3,ss](ss:songnumber)

sentfromtheexternaldevice.

80