Korg PS60 manual Ton e

Timbre Param (Timbre Parameters) Tone
9
Ton e
Main Timbres (A. Piano–Synth):
Sub Timbres (A. Piano–Synth):
Hereyoucanadjustthesoundofeachtimbreʹsprogram.
Thesesettingsaresavedineachperformance,anddonot
affecttheoriginalprograms.
About the Tone parameters
TheToneparametersofaperformancehavethefollowing
characteristics.
•TheyallowyoutoeditsomeoftheToneparametersof
theprogramselectedforthetimbre.
•Theycanbesetindividuallyfortimbres1–16.
•AlloftheToneparametersareRelativeparameters.
ParametersthatareinterrelatedwithspecificMIDICC
messagesarefollowedbyanindicationsuchas
“(CC#74).”
FormoreaboutRelativeparameters,referto“Relative(Rel)
andAbsoluteparameters”(page21)
Saving your edits of Relative parameters
ThewaythatRelativeandAbsoluteparametersaresaved
willdifferinProgramEditmode,butinPerformancemode
therearenodifferencesinhowtheseparametersaresaved.
Thechangesyoumakearesavedintheperformance,and
willnotaffecttheoriginalprograms.
Filter/Amp
Hereyoucanadjustsettingsforthefilterandampofthe
programforeachofthetimbres.
Cutoff (Filter Cutoff) [–99...+99 (Rel, CC#74)]
Thisscalesthecutofffrequencyofallofthefiltersatonce.It
affectsbothFiltersAandB.
Resonance (Filter Resonance)
[–99...+99 (Rel, CC#71)]
Thisscalestheresonanceofallofthefiltersatonce.Itaffects
bothFiltersAandB.
Filt EG Int (Filter EG Intensity)
[–99...+99 (Rel, CC#79)]
ThisscalestheeffectoftheFilterEGonthecutofffrequency.
ItaffectsFiltersAandBsimultaneously.
‐99meansnomodulation.+99meansmaximum.Modula‐
tionisinthesamedirection,positiveornegative,asthe
originalProgram.Forinstance,iftheoriginalProgram’s
“EGIntensity”wassetto‐25,thensettingthisparameterto
+99movesthe“EGIntensity”to‐99.
AmpVel Int (AmpVelocity Intensity)
[–99...+99 (Rel)]
ThisscalestheeffectofvelocityontheAmplevel.
‐99removesthevelocitymodulationentirely.+99means
maximummodulationinthesamedirection,positiveor
negative,astheoriginalProgram.
Filter/Amp EG
HereyoucanadjustsettingsforthefilterEGandampEGof
theprogramforeachofthetimbres.
Attack (Filter/Amp EG Attack Time)
[–99...+99 (Rel, CC#73)]
ThisscalestheattacktimesoftheFilterandAmpEGs,along
withotherrelatedparameters.
Whenthevalueis+1ormore,thisalsoaffectstheAmpEG’s
StartandAttackLevels,StartLevelAMS,andAttackTime
AMS.
Betweenvaluesof+1and+25,theStartLevel,StartLevel
AMS,andAttackTimeAMSwillchangefromtheirpro‐
grammedvaluesto0.Overthesamerange,theAttackLevel
willchangefromitsprogrammedvalueto99.(“AMS(Alter‐
nateModulationSource)”page28)
Decay (Filter/Amp EG Decay Time)
[–99...+99 (Rel, CC#75)]
ThisscalesthedecayandslopetimesoftheFilterandAmp
EGs.
Sustain (Filter/Amp EG Sustain Level )
[–99...+99 (Rel, CC#70)]
ThisscalesthesustainlevelsoftheFilterandAmpEGs.
Release (Filter/Amp EG Release Time)
[–99...+99 (Rel, CC#72)]
ThisscalesthereleasetimesoftheFilterandAmpEGs.