Korg X50 28: St.AutoFd Mod, 29: 2Voice Reso

119
EFFECT
The effect is off when a value for the dynamic modulation
source specified for the “AUTOFADE Src” parameter is
smaller than 64, and the effect is on when the value is 64 or
higher. The AutoFade function is triggered when the value
changes from 63 or smaller to 64 or higher.
28: St.AutoFd Mod
(Stereo Auto Fade Modulation)
This stereo chorus/flanger effect enables you to control the
LFO speed and effect balance using auto fade, and you can
spread the sound by offsetting the phase of the left and right
LFOs from each other.
29: 2Voice Reso (2Voice Resonator)
This effect resonates the input signal at a specified pitch. You
can set the pitch, output level, and pan settings for two reso-
nators individually. You can control the resonance intensity
via an LFO.
a
LFO Wave (LFO Waveform)
Selects LFO Waveform Tri, Sine
Shape (LFO Shape) –100...+100
Determines how much the LFO waveform is changed ☞ Fx:20
bLFO Phase –180...+180deg
Sets the LFO phase difference between the left and right ☞ Fx:10
c
Freq (LFO Frequency)
Sets the LFO speed 0.02...20.00Hz
(Source)
Selects the modulation source of LFO speed Off...Tempo
(Amount) –20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
L Dly (L Pre Delay)
Sets the left channel delay time 0.0...500.0ms
R Dly (R Pre Delay)
Sets the right channel delay time 0.0...500.0ms
e
Dep (Depth)
Sets the depth of LFO modulation 0...200
Fb (Feedback)
Sets the feedback amount –100...+100 ☞ Fx:20
HD (High Damp) 0...100%
Sets the feedback damping amount in the high range ☞ Fx:20
fAUTOFADE Src (AUTOFADE Source) Off...Tempo Selects the modulation source that starts AutoFade
☞ Fx:27,
g
Fade Rate (Fade-In Rate)
Sets the rate of fade-in 1...100 ☞ Fx:27
Dly (Fade-In Delay)
Sets the fade-in delay time 00...2000ms ☞ Fx:27
hFreq Mod (LFO Frequency Mod) D-mod, AUTOFADE Switches between D-mod and AUTOFADE for the LFO frequency
modulation ☞ Fx:27
iW/D Mod (Wet/Dry Mod) D-mod, AUTOFADE Switches between D-mod and AUTOFADE for the effect balance
modulation ☞ Fx:27
AUTOFADE AutoFade
Note On All Note Off
Fade-In Rate
AUTOFADE Src=Gate1
LFO Frequency[Hz]=1.00
LFO Freq. Mod=AUTOFADE
Amt=+3.00
LFO Frequency
=1.0+3.0=4.0Hz
LFO Frequency
=1.0Hz
Gate1 Signal
AUTOFADE Fade-In Delay
AutoFade LFO Frequency
Wet / Dry
Delay
Delay
Left
Right
Feedback
LFO Shape
LFO Phase
LFO: Tri / Sine
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
j
W/D (Wet/Dly) –Wet...–1:99, Dry, 1:99...Wet
Sets the balance between the effect and dry sounds
☞ Fx:10, 20,
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
a
Ctrl (Control Mode) Manual, LFO, Dmod
Switches the controls of resonance intensity ☞,
Invert (LFO/Dmod Invert) Off, On
Reverses the Voice 1 and 2 control when LFO/Dmod is selected
☞
b
lfoF (LFO Frequency)
Sets the LFO speed 0.02...20.00Hz
Dmod (Dmod Source) Off...Tempo
Selects the modulation source that controls resonance intensity
c
Mod Dep (Mod Depth) –100...+100
Sets the amount of resonance intensity control via LFO/Dmod
Trim
Sets the input level at the resonator 0...100
d
V1 Pitch (Voice1 Pitch)
Sets the voice1 Pitch for resonance C0...B8
Fine –50...+50cent
Fine-adjusts the voice 1 pitch for resonance
e
V1 Reso (Voice1 Resonance) –100...+100
Sets the intensity of resonance when Control Mode = Manual ☞
HiDamp (High Damp) 0...100%
Sets the damping amount of resonant sound in the high range ☞
f
V1 Level (Voice1 Level)
Sets the Voice1 output level 0...100
Pan
Sets the Voice1 stereo image L6...R6
g
V2 Pitch (Voice2 Pitch)
Sets the Voice2 Pitch for resonance C0...B8
Fine
Fine-adjusts the voice 2 pitch for resonance –50...+50cent
h
V2 Reso (Voice2 Resonance) –100...+100
Sets the intensity of resonance when Control Mode = Manual ☞
HiDamp (High Damp) 0...100%
Sets the damping amount of resonant sound in the high range ☞
i
V2 Level (Voice2 Level)
Sets the Voice2 output level 0...100
Pan
Sets the Voice2 stereo image L6...R6
j
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
Left
Right
Resonance
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
High Damp
High Damp
Trim
Trim
+
Level
Level Pan
Pan
Control Mode
D-mod
LFO
Manual
Invert: On/Off
Resonator
Resonator
Pitch, Fine [cent]