Korg X50 02: Pref.

0–2: Pref. (System Preference)

X50

microX

0–2a: System Preference

Multi Mode [for Ext-Seq, for Master]

This speciﬁes how MIDI data will be transmitted in Multi

mode.

for Ext-Seq: Normally, you will use Multi mode when using

this instrument as a multi-timbral sound module with an

external MIDI sequencer. In this case we recommend that

you choose “for Ext-Seq.” When you switch multi sets on

the X50/microX, program change and other MIDI messages

will not be transmitted even for tracks that are set to EXT or

BTH. This prevents echo-back from the tracks of your exter-

nal MIDI sequencer from changing the program and other

settings of tracks that are set to the same MIDI channel.

for Master: Use this setting if you’re using this instrument in

Multi mode as a master keyboard to control an external

MIDI sound module. When you switch multi sets on the

X50/microX, program change and other MIDI messages for

tracks set to EXT or BTH will be transmitted to set up your

external MIDI sound module. If you’re using the X50/

microX as a master keyboard, you’ll normally use Combina-

tion mode, but we recommend that you use this setting if

you’re using Multi mode to control an external MIDI sound

module.

When you switch multi sets, MIDI messages for the follow-

ing parameters will be transmitted from tracks set to EXT or

BTH.

• “Program Select” (MULTI 0–2(3)b): CC#00 bank select

(LSB), CC#32 bank select (MSB), program change

• “Pan” (MULTI 0–4(5)a): CC#10 pan

• “Volume” (MULTI 0–4(5)a): CC#7 volume

• “Portamento” (MULTI 2–3(4)a): CC#65 portamento on/

off, CC#5 portamento time

• “Send 1/2 (MULTI 8–1(2)a, 8–3a): CC#93 send level,

CC#91 send 2 level

• Pan (CC#8) (8–3a): CC#8 post insert effect pan

Bank Map [KORG, GM]

Speciﬁes the mapping of programs and combinations rela-

tive to Bank Select control change messages (CC#0 upper

byte and CC#32 lower byte).

X50: The bank select messages shown in the following

table can be received (R) or transmitted (T), corresponding

to Program banks A...D, banks G, g(d) and Combination

banks A...C.

Value: decimal, R: Receive, T: Transmit

microX: The bank select messages shown in the following

table can be received (R) or transmitted (T), corresponding

to Program banks A...E, banks G, g(d) and Combination

banks A...C.

Value: decimal, R: Receive, T: Transmit

Power On Mode [Reset, Memorize]

Speciﬁes the condition at power-on.

Reset: This instrument will be in Combination mode

COMBI 0: Play, and Combination A000 will be selected.

Memorize: The location (mode and page) where you were

when the power was last turned off, and the last-selected

program or combination number will be selected.

The contents of any parameters that were being edited

are not saved by this function. Before turning the power

off, you must Write your edits.

Page Menu Style [Icon, List]

In each mode, you can press the [MENU/OK] button to see

a list of the pages (PAGE MENU) for that mode. Here’s how

you can specify how this list will appear.

Icon: The pages will appear as icons. Use the ClickPoint

[√][®][π][†] to select the page you want to view, and

press the center of the ClickPoint to access that page. The

page you had selected immediately before accessing the

PAGE MENU will be highlighted.

0–2a

0–2b

0–2a

0–2b

Bank Bank Map: KORG Bank Map: GM

Bank A 00. 00 R/T 63. 00 R/T

Bank B 00. 01 R/T 63. 01 R/T

Bank C 00. 02 R/T 63. 02 R/T

Bank D 00. 03 R/T 63. 03 R/T

Bank G 121. 00, 121. 01…09 R/T 121. 00, 121. 01…09 R/T

56. 00 R 56. 00 R

00. 00, 00. 01...(XG) R

00. 00, 01. 00...(GS) R

Bank g (d) 120. 00 R/T 120. 00 R/T

62. 00 R 62. 00 R

63. 127 R (→Korg MUTE)